Installation in closed or open grooves
Material (1) Seal: fabric-reinforced NBR
(2) Support ring: acetal resin / PTBR
Max. operating pressure up to 250 bar
Media Mineral oil
Water emulsions
Sliding speed max. 0.5 m/s
Temp. max. 110 °C
Temp. min. -30 °C


Simple solution.
Low-friction seal.
Extremely good sealing effect at low pressure.

Article Table

Product Name d nom. mm D mm L mm
Product Name d nom. mm D mm L mm
B 208 165-GS 42.00 53.00 10.00
B 267 236-P 60.00 68.00 11.00
B 275 216-GS 55.00 70.00 10.50
B 314 255-GS 65.00 80.00 11.50
B 334 255-GS 65.00 85.00 14.50
B 334 275-GS 70.00 85.00 12.00
B 366 307-GS 78.00 93.00 11.50
B 374 314-GS 80.00 95.00 12.00
B 748 669-GS 170.00 190.00 14.50


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.