TDOP

Complete piston TDOP

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application Pneumatics
Design Complete pistons
Installation push onto piston recess with the rubber side and affix with washer and nut.
Material NBR 85° Shore A, with steel core
Media Mineral oil
Water-air
Operating pressure 10 bar
Sliding speed max. 1.0 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

Complete pistons.

Hints

Tolerance: D= H11; d= f8; E= +/-0.5

Article Table

Product Name D mm E mm P mm e mm d mm
Product Name D mm E mm P mm e mm d mm
TDOP 25 25 12 15.6 3.8 8
TDOP 32 32 15 20.0 3.8 8
TDOP 40 40 18 27.0 4.8 10
TDOP 50 50 18 37.0 4.8 10
TDOP 60 60 22 43.0 6.0 12
TDOP 63 63 22 43.0 6.0 12
TDOP 063-1 63 22 43.0 6.0 16
TDOP 65 65 25 43.0 6.0 12
TDOP 70 70 25 50.0 6.0 12
TDOP 80 80 24 55.0 6.0 16
TDOP 100 100 26 75.0 7.0 20
TDOP 125 125 26 95.0 9.6 20
TDOP 160 160 30 129.0 10.8 27
TDOP 200 200 35 169.0 11.4 27

Order hints

For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM, EPDM.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.