Sealing equipment

Reliable solutions for your requirements
quality all along the line
Sealing equipment
As a leading company in hydraulics HANSA-FLEX offers you all the seals you need for your application, from the rod seal through to the piston seal, flange seal or flat seal. Our product range also includes aluminium or copper seal rings, O-rings, Usit rings, guide rings, U-rings, support rings and wiper seals.

We have more than 8,000 standard seals in stock at our central warehouse, from 5 mm inside diameter to 520 mm outside diameter in all types of material: NBR, FPM, EPDM, MVQ, FFKM, PTFE, polyurethane, polyamide, graphite or stainless steel, slide bearings , PTFE, POM, bronze, etc.

Sealing equipment

10 Item(s)
per page
  1. DDE
    Operating pressure 80 bar
    Temp. min. -30 °C
    Design Piston U-ring
    Material NBR 75° Shore A
    Media Mineral oil
    Water-air
    Installation on one-piece pistons A
    on multi-part pistons B
  2. DDEM
    Operating pressure 80 bar
    Temp. min. -30 °C
    Design Piston U-ring
    Material NBR 75° Shore A
    Media Mineral oil
    Water-air
    Installation on one-piece pistons A
    on multi-part pistons B
  3. DDEM P
    Operating pressure 16 bar
    Temp. min. -30 °C
    Design Piston U-ring
    Material PUR 90° Shore A
    Media Air
    Installation on one-piece pistons A
    on multi-part pistons B
  4. DDI
    Operating pressure 120 bar
    Temp. min. -30 °C
    Design Rod U-ring
    Material NBR 90° Shore A
    Media Mineral oil
    Water-air
    Installation in closed grooves A
    in open grooves B
  5. DDIM
    Operating pressure 120 bar
    Temp. min. -30 °C
    Design Rod U-ring
    Material NBR 90° Shore A
    Media Mineral oil
    Water-air
    Installation in closed grooves A
    in open grooves B
  6. DDIM P
    Operating pressure 16 bar
    Temp. min. -30 °C
    Design Rod lip seal
    Material PUR 90° Shore A
    Media Air
    Installation in closed grooves A
    in open grooves B
  7. GPP
    GPP - GPP
    Operating pressure 16 bar
    Temp. min. -30 °C
    Material (2) Static seal: NBR
    (1) Dynamic seal: PUR
    Media Mineral oil
    Installation on one-piece pistons A
    on multi-part pistons B
    Sliding speed max. 1.0 m/s
  8. NPSL
    Operating pressure 10 bar
    Temp. min. -30 °C
    Design Rod wiper seal
    Material NBR 75° Shore A
    Media Mineral oil
    Water-air
    Installation in open grooves B
  9. NPSL-P
    Operating pressure 10 bar
    Temp. min. -30 °C
    Design Rod wiper seal
    Material Polyurethane 93° Shore A
    Media Mineral oil
    Water-air
    Installation in open grooves B
  10. TDOP
    Operating pressure 10 bar
    Temp. min. -30 °C
    Design Complete pistons
    Material NBR 85° Shore A, with steel core
    Media Mineral oil
    Water-air
    Installation push onto piston recess with the rubber side and affix with washer and nut.
10 Item(s)
per page