HK FI AD 1800 E0 N AF VG

Adsorberfilter Ölnebel bis 1800l-Tank EW

The product image may differ

Air volume

260 m³/h

For tank size

800 to 1800 litres

Oil absorption capacity max.

1.1 l

PDF letöltése

Kérjük, válasszon kivitelt

Cikktáblázat mutatása

HK FI AD 0400 E0 N AF VG HK FI AD 0800 E0 N AF VG HK FI AD 1800 E0 N AF VG

Az alábbi termék részletinformációi

HK FI AD 1800 E0 N AF VG

Air volume

260 m³/h

For tank size

800 to 1800 litres

Oil absorption capacity max.

1.1 l

Activated carbon fill quantity

3 kg

464 mm

150 mm

154 mm

G 1″ -11

Összes tulajdonság

Tulajdonságok

Design

Disposable oil mist adsorber, without valves
integrated filter element 3 µm

Installation position

vertical

Temp. min.

-40 °C

Temp. max.

80 °C

Material

Housing: PA6, PC, PVC
seal: FKM (FPM)

Connection

BSPP male thread, parallel

Connection position

at bottom

Customs tariff number

84213925

Összes tulajdonság

Termékleírás

Utalások

The oil mist adsorber filter must be completely replaced after saturation.
Design basis are medium, tank volume and evaporated oil volume.

Leírás

The oil mist adsorber filters of the HK FI AD E0 VG series are disposable oil mist separators without valves.
They are suitable for indoor and outdoor use on hydraulic units, gearboxes, barrels and IBCs.
The plastic housing is filled with activated carbon.
In combination with a splash guard and oil demister, the activated carbon cleans the air flowing out of the system and thus protects the environment from contamination by oil aerosols.
If the adsorber is saturated (discoloration of the white silica gel layer), it is replaced.

Kiegészítő információk

The oil mist adsorber filter binds the oil particles contained in the outflowing air.
Larger oil aerosols stick to the metal demister, condense and drip back into the tank. The smaller oil aerosols are bound in the pores of the activated carbon.
The saturation (loading) and the necessary replacement of the filter cartridge is indicated by a colour change of the white layer from colourless to brown.
The adsorber is completely replaced after saturation.
Активированный уголь состоит в основном из углерода с высокопористой структурой. Поры соединены между собой, как губка.
Площадь внутренней поверхности составляет от 300 до 2000 м²/г угля, поэтому площадь внутренней поверхности четырех граммов активированного угля примерно эквивалентна площади футбольного поля. Плотность активированного угля находится в диапазоне от 0,2 до 0,6 г/см³.
Активированный уголь связывает неполярные вещества (вещества, которые не смешиваются с водой) во внутренних порах.

Megrendelési tudnivaló

For mounting on the tank, the KH FI AD FS FILL filling flange is required.