Ko ieškote?

Įveskite paieškos žodį

Apgailestaujame!

Nieko nerasta.

Prisijungimas

Pamiršote savo slaptažodį?

Esate naujas klientas?

Registruokitės ir gaukite daug naudos:

Produkto prieinamumo patikrinimas
Greitas kitas užsakymas ir užsakymų istorija
Asmeninės produktų rekomendacijos
Mokėjimas pagal sąskaitą
Užsiregistruokite dabar

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+49-421-48907-766
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
DUK

BV 06-18 M

NaprSavCije CijevVP 06-18 metalna kutija
BV06-18M

The product image may differ

BV06-18M BV06-18M
BV06-18M BV06-18M BV06-18M
Ambalaža
u metalnom kovčegu 
za vanjski Ø cijevi
06 - 18 
Parsisiuntimai PDF formatu

Pasirinkite versiją

Rodyti prekių lentelę

Prekė

BV 06-18 BV 06-18 M
Papildoma informacija apie gaminį

BV 06-18 M

Ambalaža
u metalnom kovčegu
za vanjski Ø cijevi
06 - 18

Savybės

Boja
  • srebrna 
Izvedba
  • manual 
Izvedba
  • Tube bending tool 6 - 18 
Materijal
  • čelik 
  • aluminij 
Pričvršćenje
  • In vice 
Customs tariff number
  • 84622998 
Visos savybės

Gaminio aprašymas

Nuorodos
Please note that a good bending quality can only be achieved if the tube being bent is also made of a flexible material.
The HANSA-FLEX tubes made of steel and stainless steel from our online shop and branches fulfil these characteristics.
We recommend purchasing the tube bending tool in a robust metal box because you will be able to quickly see if all of the equipment is correctly packed away.
Aprašymas
This extremely lightweight and flexible tube bending equipment, is designed for use either in the workshop or in the field and can be used to precisely bend flexible hydraulic tubes.
The set includes six bending rollers with radii of between 33.0 mm to 51.5 mm for tight installation sites.
The 650 mm long manual lever reduces the force required to bend the tubes and helps the user easily achieve bending angles of up to 180°.
Application
The tube bending tool can be used wherever a defective pipe cannot or may not be replaced with a hydraulic hose.
If a pipe was previously fitted, a hydraulic hose should only be installed as a temporary solution.
If the bent pipe is professionally installed, it will remain in the position it is fitted.
The bending equipment can be used in the construction, agriculture and forestry sectors, as well as for municipal technology and service and maintenance work.
Tiekimo apimtis
A base plate for inserting into a vice.
A fixing roller (left-hand thread) as a tube stop
Six bending rollers for tubes with the following external diameters: Ø 6.0 - 8.0 mm, Ø 10 - 12 mm, Ø 14 mm, Ø 15 mm, Ø 16 mm and Ø 18.0 mm.
A bending lever with pressure roller
A printed product description and recommendations for use

Product variants

2 Results
Search
Pavadinimas
Ambalaža
za vanjski Ø cijevi
Detalės / Komad
BV 06-18
u kartonskoj ambalaži 
06 - 18 
Sužinokite daugiau
BV 06-18 M
u metalnom kovčegu 
06 - 18 
Sužinokite daugiau

Column selection

Ambalaža
za vanjski Ø cijevi