HK SP CAER 110AC

Solenoid coil 110VAC for HKDKER

Abbildung kann abweichen

Nominal voltage +/- 10 %

110 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average power consumption

95 W

PDF Downloaden

Bitte wählen Sie eine Ausführung

Artikeltabelle anzeigen

HK SP CAER 110AC HK SP CAER 230AC

Produktdetails zu

HK SP CAER 110AC

Nominal voltage +/- 10 %

110 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average power consumption

95 W

For valve type

HK DKER

Eigenschaften

Customs tariff number

85059029

Produktbeschreibung

Hinweise

In case of AC coils the power input is significantly higher in the considerably phase than in the holding phase. These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through. A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.
Tightening torque for attaching nuts of the solenoid coils: 3Nm

Bestellhinweis

Other types of coil available on request

Lieferumfang

With O-ring

Produktvarianten

2 Ergebnisse

Suche

HK SP CAER 110AC

110 V AC

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

95 W

HK DKER

Mehr erfahren

HK SP CAER 110AC masterImage

Abbildung kann abweichen

HK SP CAER 110AC masterImage

HK SP CAER 110AC

Solenoid coil 110VAC for HKDKER Technische Informationen

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average power consumption

95 W

Nominal voltage +/- 10 %

110 V AC

For valve type

HK DKER

Alle Produktdetails sehen

HK SP CAER 230AC

230 V AC

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 220

95 W

HK DKER

Mehr erfahren

HK SP CAER 230AC masterImage

Abbildung kann abweichen

HK SP CAER 230AC masterImage

HK SP CAER 230AC

Solenoid coil 230VAC for HKDKER Technische Informationen

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 220

Average power consumption

95 W

Nominal voltage +/- 10 %

230 V AC

For valve type

HK DKER

Alle Produktdetails sehen

Nominal voltage +/- 10 %

Corresponding connectors

Average power consumption (W)

For valve type

Teile und Zubehör

Zubehör

MAS_HK_SP_DIN_43650

HK SP DIN 43650

10 Ausführungen

Elektrischer Stecker für Magnetspule DIN 43650 / ISO 4400

EN 175301-803 (DIN 43650) / ISO 4400

Betriebstemperatur

-40 °C bis +125 °C

Gehäuse: Polyamid

Kontakte: CuZn

IP 65

Stecker mit Zentralschraube, Bauform A

Nachfolger

HK SP CAE 110AC

Magnetspule 110VAC für HKDKE AC

Nennspannung +/- 10 %

110 V AC

zugehörige Stecker

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

mittlere Leistungsaufnahme

95W