Какво търсите?

Въвеждане на търсено понятие

Съжаляваме!

Няма открити резултати от търсенето.

Регистрация

Забравили сте Вашата парола?

Vi ste novi kupac?

Registrirajte se i osigurajte mnogobrojne prednosti:

Provjera raspoloživosti proizvoda
Brza dodatna narudžba i povijest narudžbi
Osobne preporuke proizvoda
Plaćanje temeljem računa
Регистрирайте се сега

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+49-421-48907-766
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
Često postavljana pitanja

BV 06-18 M

Tube bending device tube-OD 06-18 m-case
BV06-18M

The product image may differ

BV06-18M BV06-18M
BV06-18M BV06-18M BV06-18M
For tube outside Ø mm
06 - 18 
Packaging
in the metal case 
Сваляне на PDF

Моля изберете изпълнение

Prikaži tablicu artikala

Artikl

BV 06-18 BV 06-18 M
Подробности за продукта за

BV 06-18 M

For tube outside Ø mm
06 - 18
Packaging
in the metal case

Свойства

Colour
  • silver 
Construction type
  • Tube bending tool 6 - 18 
Design
  • manual 
Material
  • steel 
  • aluminium 
Mounting
  • In vice 
Customs tariff number
  • 84622998 
Всички качества

Opis proizvoda

Указания
Please note that a good bending quality can only be achieved if the tube being bent is also made of a flexible material.
The HANSA-FLEX tubes made of steel and stainless steel from our online shop and branches fulfil these characteristics.
We recommend purchasing the tube bending tool in a robust metal box because you will be able to quickly see if all of the equipment is correctly packed away.
Описание
This extremely lightweight and flexible tube bending equipment, is designed for use either in the workshop or in the field and can be used to precisely bend flexible hydraulic tubes.
The set includes six bending rollers with radii of between 33.0 mm to 51.5 mm for tight installation sites.
The 650 mm long manual lever reduces the force required to bend the tubes and helps the user easily achieve bending angles of up to 180°.
Application
The tube bending tool can be used wherever a defective pipe cannot or may not be replaced with a hydraulic hose.
If a pipe was previously fitted, a hydraulic hose should only be installed as a temporary solution.
If the bent pipe is professionally installed, it will remain in the position it is fitted.
The bending equipment can be used in the construction, agriculture and forestry sectors, as well as for municipal technology and service and maintenance work.
Обем на доставката
A base plate for inserting into a vice.
A fixing roller (left-hand thread) as a tube stop
Six bending rollers for tubes with the following external diameters: Ø 6.0 - 8.0 mm, Ø 10 - 12 mm, Ø 14 mm, Ø 15 mm, Ø 16 mm and Ø 18.0 mm.
A bending lever with pressure roller
A printed product description and recommendations for use

Product variants

2 Results
Search
Обозначение
Опаковка
за външен Ø на тръбата мм
Подробности / items
BV 06-18
в кашон 
06 - 18 
Узнайте повече
BV 06-18 M
в метален куфар 
06 - 18 
Узнайте повече

Column selection

Опаковка
за външен Ø на тръбата мм