Šta tražite?

Unesi pojam pretrage

Žao nam je!

Nije pronađen nijedan rezultat pretrage.

Prijavljivanje

Zaboravili ste vašu lozinku?

Novi ste kupac?

Registrujte se i osigurajte sebi mnoge prednosti:

Provera raspoloživosti proizvoda
Brza porudžbina i istorija porudžbine
Lične preporuke za proizvod
Plaćanje prema računu
Registrujte se sada

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+49-421-48907-766
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
Najčešća pitanja

CORROSCHUTZSPRAY

Corrosion protection
CORROSCHUTZSPRAY

The product image may differ

CORROSCHUTZSPRAY
Content
400 ml
PDF preuzimanje

Izaberite izvršenje

Prikaz tabele s artiklima

Artikal

CORROSCHUTZSPRAY
Detalji proizvoda za

CORROSCHUTZSPRAY

Content
400 ml

Svojstva

Features
  • Adheres to all metal surfaces and leaves a non-slip, flexible and silicone-free protective film. The coating is resistant to e.g., salt water (240 h salt spray test according to DIN 50021). 
Temp. range
  • -20 °C to +80 °C 
Customs tariff number
  • 27129099 

Opis proizvoda

Napomene
Safety and health: When processing HANSA-FLEX products, the physical, safety, toxicological and ecological data and regulations in our EC safety data sheets must be observed.
Opis
HANSA-FLEX CORROSCHUTZSPRAY is based on synthetic wax and special additives.
It can thus be used both for temporary corrosion protection and also to preserve uncoated bare metal parts.
Application
Clean surfaces thoroughly and degrease. For example, with HANSA-FLEX ENTFETTERSPRAY.
Allow the product to warm up to room temperature for flawless spraying performance.
Shake can before use, until you can hear the agitator ball.
At room temperature, spray evenly in a criss-cross pattern at a distance of approx. 20 cm.
To enhance corrosion protection, several layers may be applied.
After approximately 3 - 4 hours, the coating is fully cured at room temperature.
The protective film can be removed with cleaning spray, for example.

Product variants

1 Result
Search
Opis
Sadržaj (ml)
Detalji / items
CORROSCHUTZSPRAY
400 ml
Saznajte više

Column selection

Sadržaj (ml)